A bootstrap USB flash drive has been prepared using a Windows workstation to load the initial configuration of a firewall that was previously being used in a lab. The USB flash drive was formatted using file system FAT32 and the initial configuration is stored in a file named init-cfg.txt. The firewall is currently running PAN- OS 10.0 and using a lab config. The contents of init-cfg.txt in the USB flash drive are as follows: *(refer to diagram in explanation below)* The USB flash drive has been inserted in the firewalls' USB port, and the firewall has been restarted using command: > request restart system Upon restart, the firewall fails to begin the bootstrapping process. The failure is caused because:
Select one answer.
Marked answer: B
Community Discussion
Written by other learners. Comments can disagree with the marked answer — check the official documentation when in doubt.
1
Answer: B
1
D: Microsoft Windows and Apple Mac operating systems are unable to read the bootstrap USB flash drive because the drive is formatted using an ext4 file system. You must install third-party software or use a Linux system to read the USB drive.
