Preparing Practice Exam…
Please wait a moment while the system generates the exam questions, answers, and study session.
Please wait a moment while the system generates the exam questions, answers, and study session.
Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) · Cisco
Select one answer.
Written by other learners. Comments can disagree with the marked answer — check the official documentation when in doubt.
A. A. RSPAN session 1 is incompletely configured for monitoring. Seems correct based on output. B. RSPAN session 1 monitors activity on VLAN 50 of a remote switch. No, VLAN 50 is the RSPAN source VLAN. C. SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15. No direction (rx, tx or both) offered in the outputs so we cannot tell. D. SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14. No, again no direction is offered in the output. The ingress: disabled relates to the destination port config, the destination port is not configured to send traffic back to the network, this option is used when bidirectional traffic monitoring is required for systems such as a security device like IDS and the commands to configure would be something like - monitor session 1 ingress enabled
A) Missing destination port
way not B since session 1 is a Remote Destination Session with the Source RSPAN VLAN set to 50. witch mean that SW1 is set to receive mirrored traffic from VLAN 50 of another switch, which is being sent to this switch using RSPAN. please correct me if I'm wrong