Preparing Practice Exam…
Please wait a moment while the system generates the exam questions, answers, and study session.
Please wait a moment while the system generates the exam questions, answers, and study session.
Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) · Cisco
Select one answer.
Written by other learners. Comments can disagree with the marked answer — check the official documentation when in doubt.
B is the correct answer
It is because they typed the VRF command AFTER the ip address, the ip got removed, so we need to add it back...
Just put the IP back to the interface and you're good. R1(config)#ip vrf CCNP R1(config-vrf)#rd 1:100 R1(config-vrf)#exit R1(config)#int lo 0 R1(config-if)# R1(config-if)#ip address 10.1.1.1 255.255.255.0 R1(config-if)#ip vrf forwarding CCNP % Interface Loopback0 IPv4 disabled and address(es) removed due to disabling VRF CCNP R1(config-if)#exit R1(config)#do show run int lo 0 Building configuration... Current configuration : 66 bytes ! interface Loopback0 ip vrf forwarding CCNP no ip address end