Preparing Practice Exam…
Please wait a moment while the system generates the exam questions, answers, and study session.
Please wait a moment while the system generates the exam questions, answers, and study session.
Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) · Cisco
Select one answer.
Written by other learners. Comments can disagree with the marked answer — check the official documentation when in doubt.
Correct answer is B, If R4 becomes RR then it can learn routes from the client i.e, R2 and R3. R2 and R3 learns about 192.168. from R1 as they are directly connected to R1
D is the least WRONG answer. Question states that BGP is configured for connected neighbors, so R1 and R4 are not connected. You want R4 to be a RR client, but on the given topology that would likely be R2 or R3 or both.
There is no correct answer; for R4 to learn the 192.168.100.0 route, R2 or R3 must be route-reflector, but it does not have the option. C and D may be correct in this situation because trying to set up a route-reflector client requires a neighbor x.x.x.x remote-as command in advance, and once neighbor is set up between R1 and R4, R4 can learn 192.168.100.0. iBGP neighbor ttl is 255 so no need to directry connected to be iBGP neighbor. in my opinion the question is broken anyway.....