200-301 Question 353

Question

Refer to the exhibit. What commands are needed to add a sub-interface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address 10.20.20.1/24? *(refer to diagram in explanation below)*
A. R1(config)#interface ethernet0/0 R1(config-if)#encapsulation dot1q 20 R1(config-if)#ip address 10.20.20.1 255.255.255.0
B. R1(config)#interface ethernet0/0.20 R1(config-if)#encapsulation dot1q 20 R1(config-if)#ip address 10.20.20.1 255.255.255.0
C. R1(config)#interface ethernet0/0.20 R1(config-if)#ip address 10.20.20.1 255.255.255.0
D. R1(config)#interface ethernet0/0 R1(config-if)#ip address 10.20.20.1 255.255.255.0

Accepted Answer

Marked answer: B. R1(config)#interface ethernet0/0.20 R1(config-if)#encapsulation dot1q 20 R1(config-if)#ip address 10.20.20.1 255.255.255.0

200-301 Question 353

Community Discussion

Preparing Practice Exam…

200-301 Question 353

Community Discussion