Preparing Practice Exam…
Please wait a moment while the system generates the exam questions, answers, and study session.
Please wait a moment while the system generates the exam questions, answers, and study session.
Cisco Certified Network Associate (CCNA) · Cisco
Select one answer.
Written by other learners. Comments can disagree with the marked answer — check the official documentation when in doubt.
Answer A is correct
Switch#show vtp status VTP Version capable : 1 to 2 VTP version running : 1 VTP Domain Name : cisco VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 0000.0C64.9AD0 Configuration last modified by 0.0.0.0 at 3-1-93 00:13:25 Feature VLAN : -------------- VTP Operating Mode : Client Maximum VLANs supported locally : 255 Number of existing VLANs : 9 Configuration Revision : 2 MD5 digest : 0x37 0x0F 0x5E 0x5A 0x37 0x97 0xB5 0x7B 0x66 0x16 0x1A 0x3B 0xA7 0xA9 0x9B 0x48 Switch# Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#vlan 99 VTP VLAN configuration not allowed when device is in CLIENT mode.
Answer A is correct "The switch must be in VTP server or transparent mode before you can configure a VLAN". The VTP default status is set to server. If you add another switch to your network, you need to change its VTP mode to client. Otherwise it may kill your VLAN configuration within the whole network!