SIMULATION Guidelines This is a lab item in which tasks will be performed on virtual devices.
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab doses and cannot be reopened. Topology Tasks Refer to the topology. All physical cabling is in place. Configure a local user account, a Named ACL (NACL) and security. 1. Configure a local account on Sw101 with telnet access only on virtual ports 0-4. Use the following information: o Username: netops o Password: ipsec4all o Algorithm: "Vigenere" o Privilege level: Exec mode 2. Configure and apply a single NACL on Sw103 using the following: o name: ENT_ACL o Restrict only PC1 on VLAN 10 from pinging PC2 o Allow only PC1 on VLAN 10 to telnet to R1 (172.16.30.2) o Prevent all other devices from telnetting from VLAN 10 o Allow all other network traffic from VLAN 10 3. Configure security on interface Ethernet 0/0 of Sw102: o Set the maximum number of secure MAC addresses to two o Ensure that the port discards the packet, counts the number of violations and sends a syslog message o Allow secure mac addresses to be learned dynamically
Select one answer.
Purchase Full Access to view answer options & explanation
The first 375 questions in this bank are completely free. Unlock Full Access on the exam page to view all answer choices, verified answers, explanations, and community discussions for all 1,250 questions.
