SIMULATION Guidelines This is a lab item in which tasks will be performed on virtual devices.
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology lab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab closes and cannot be reopened. Topology Tasks All physical cabling is in place and verified. Router R1 is configured and passing traffic for VLANs 5 and 6. All relevant ports are pre-configured as 802.1q trunks. 1. Configure SW-1 port E0/0 to permit only VLANS 5 and 6 2. Configure both SW-1 and SW-2's E0/1 ports to send and receive untagged traffic over VLAN 77 3. Configure SW-2 E0/2 port to permit only VLAN 6 4. Configure both SW-3 and SW-4 ports e0/0 and e0/1 for link aggregation using the industry standard protocol with the following requirements: o SW-3 ports must immediately negotiate the aggregation protocol o SW-4 ports must not initiate the negotiation for the aggregation protocol o Use the designated number assignment
Select one answer.
Purchase Full Access to view answer options & explanation
The first 375 questions in this bank are completely free. Unlock Full Access on the exam page to view all answer choices, verified answers, explanations, and community discussions for all 1,250 questions.
