SIMULATION Guidelines This is a lab item in which tasks will be performed on virtual devices
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked the lab closes and cannot be reopened. Topology Tasks Configure IPv4 and IPv6 connectivity between two routers. For IPv4, use a /28 network from the 192.168.180.0/24 private range. For IPv6, use the first /64 subnet from the 2001:0db8:acca::/48 subnet. 1. Using Ethernet0/1 on routers R1 and R2, configure the next usable /28 from the 192.168.180.0/24 range. The network 192.168.180.0/28 is unavailable. 2. For the IPv4 /28 subnet, router R1 must be configured with the first usable host address. 3. For the IPv4 /28 subnet, router R2 must be configured with the last usable host address. 4. For the IPv6 /64 subnet, configure the routers with the IP addressing provided from the topology. 5. A ping must work between the routers on the IPv4 and IPv6 address ranges.
Select one answer.
Purchase Full Access to view answer options & explanation
The first 375 questions in this bank are completely free. Unlock Full Access on the exam page to view all answer choices, verified answers, explanations, and community discussions for all 1,250 questions.
