Cisco Certified Network Associate (CCNA) Practice Mode

Community Discussion

Written by other learners. Comments can disagree with the marked answer — check the official documentation when in doubt.

• Chose D1

  d is correct

• Chose D1

  Communication between AP and WLC is done through tunnels. So as long as there is IP connectivity, the WLC could be located anywhere in the network. Doesn't need to be directly connected or on the same L2 network.

• 3

  D. The access point has the ability to link to any switch in the network, assuming connectivity to the WLC. Option A is incorrect because the access point needs to be connected to the wired network to establish CAPWAP communication with the WLC. Option B is incorrect because the access point doesn't necessarily have to be connected to the same switch as the WLC. It can be connected to any switch within the network infrastructure, as long as there is connectivity between the access point and the WLC. Option C is incorrect because the access point does not typically require a direct copper cable connection to the WLC. The communication between the access point and the WLC is achieved through the existing network infrastructure, not through a direct point-to-point connection. Therefore, option D is the correct answer. The access point has the flexibility to link to any switch in the network, as long as there is connectivity to the WLC, allowing for CAPWAP communication between the access point and the WLC.